|
GHL High Speed Mixing and Granulating Machine
 Principle
¡øThe powder raw material and adhesive in a cylinder are mixed ffully at the
bottom to become a humid soft material, Then it is cut through high-speed
crusher and become uniform granules.
Features
¡ø The machine adapts horizontal cylinder structure. Its structures is reasonable;
¡ø Use ailr filled seal shaft to drive. When washing, it can be changed to water;
¡ø Use fluidization to Granulate and the granule is near ball. Its flow is good;
¡ø Compared the traditional process, 25% of adhesive can be reduced and the
daying time can be shorted;
¡ø The time of mixing in dry is 2 minutes and the time of granulating is 1-4 minutes.
Compared with the traditional process, 4-5 times of efficiency is raised;
lin the same sealed container, dry mixing, humidity mixing and granulating can
be finished, It is in conformity with the requirements of GMP;
tithe whole opertation has strict safe and protective measures.
Flow chart
Drawing of lay-out ¡¡¡¡¡¡
Overall dimensions
 
Dimension Table
Technical Parameters |
